Microprocessor-based indicator in 48x48 mm (1/16 DIN) format, manufactured using SMT.
The instrument features a Lexan membrane faceplate (IP65 protection) with 3 keys, a 4-digit display, and 3 LEDs indicating output statuses.
The input signal can be selected from a wide range of sensors:

• Potentiometer (minimum 100 Ω)
• Load cell with sensitivity autoranging between 1.5 and 3.3 mV/V
• Strain-gauge pressure sensor

Signal selection is made using the faceplate keys.
A digital input (24Vdc/4mA) is available for resetting, hold, flash, peak handling, or releasing latch.
The instrument has up to 3 outputs, which can be mechanical relays (5A/250V) or logic outputs (0–11Vdc).
One output of 4–20 mA (max. 150 Ω) is available for retransmitting the measured input signal.
Retransmission output, digital input, and the third output are alternatives.
Programming is simplified by grouping parameters in function blocks (CFG for alarm hysteresis, Inp for inputs, Out for outputs) and a simplified data entry menu.
Configuration can be further simplified using the PC programming kit (connection cable + Windows menu guide, data sheet cod. WINSTRUM).
A configurable personal software protection code (password protection) can restrict editing and display of configuration parameters.